Transcript 0:00 [rock music] Welcome back to another episode of Vanguard Radio. I'm your host, Jay Richard Jones. 0:10 Today we're going to be talking about seawater lubricated propellers, shafts, bearings, and seals. 0:19 If you're in the shipbuilding industry, you know just how important that is, and we have the opportunity to have on our program as a guest, one of the leading companies that are involved in the production of these types of materials. 0:34 In the show today, we're gonna speak with George A. Thompson, also known as Sandy. He is the visionary and innovator and original founder of Thordon Bearings Inc. 0:47 Let me just set this up for our listenership and readership to give you a little bit of background. In 1965, Sandy joined the family business, Thompson, Gordon Limited in Hamilton, Ontario. 0:59 At the time, the company was primarily a distributor of engineer supplies. Sandy was looking for a niche where he could engineer mechanical products that were made from rubber and plastic components. 1:12 They had to be designed, and they had to be developed. As a result, the Thordon polymer was introduced in the late 1960s. Sandy's focus on innovation and developing export markets has been the key to Thordon's success. 1:27 In 1990, he bought the Russian deep sea salvage tug, Rudokop, and converted it into a floating showcase of Thordon Marine bearings and seal products, then captained the ship, visiting more than 200 ports in Europe. 1:43 With Sandy at the helm, Thordon has become a global leader in seawater lubricated propeller shaft bearings and seals, as well as offering a complete range of non-metallic sleeve bearing solutions for marine, clean power generation, pump, offshore, and other industrial markets. 2:02 Sandy, welcome to Vanguard Radio. Thank you, Jay. Pleasure to be with you. You have had quite a career. Um, why don't we begin by you, you're an innovator. 2:13 It sounds like you're an inventor, a visionary, an astute business person. Tell us a little bit about your background and, and what's your role now? Well, I started out as a musician, actually, you know, earning money. 2:26 Uh, I was going to college. I went to university in the United States, and, uh, I'm a graduate mechanical engineer. 2:33 And while I was going to school, I, I had a job on the weekends playing in a band and, uh, playing the vibraphone. And I... When I graduated, I thought, "You know what? I, I've got two choices. 2:43 I can either stay in music or I can go, go into, uh, engineering." And, and I really didn't know what might be the best ch- choice at that point, but I think I made the right call. 2:53 And, uh, I went to work for a company in a- in, in Boston, and then a coup- a few years later, I, I moved back to Canada. But I, uh... 3:01 at that time, I thought I'd probably stay in the United States, so I wasn't really planning to go into the family business till my mother asked me to come back. Well, I can understand that for sure. 3:12 You've got quite a bit of experience, I think, as well in, in product development. Can you, can you tell us a little more about what is the Thordon polymer? 3:21 Well, when I came into the business, as you mentioned earlier, uh, I didn't really want to carry on making, uh, pro- selling products that other people made. 3:31 I wanted to make my own, and I wanted to find, uh, something that was, uh, had to do with rubber or elastomeric products that, uh, was unique. And, uh, 3:42 I was thinking of either a flexible coupling or a flexible mounting or a bearing. And I looked at all three options and decided that the shaft bearing was probably the area where there'd been the least development. 3:54 And these are all products are made from rubber. So that's why I... 3:57 that's where I started looking into the polymer options that we could, we could use to, to make a rubber bearing, uh, a better bearing than a rubber bearing than, than the traditional rubber bearing. 4:07 And so it all started with a bearing that, that we, uh, we c- concocted. Uh, I had my, my uncle, who was a polymer chemist working with me, and, uh, and, and another, uh, research, uh, um, Dr. 4:21 Pandey, um, he was a, a polymer scientist. Those two guys and myself, we cooked up what, what is today called Thordon. So your products are known pretty much all over the world then. 4:35 Are there, uh, any lessons you can share with us, uh, working with different countries, Sandy? Yeah. I didn't want to re- confine my, my, uh, sales efforts just to Canada. I mean, we did for a couple of years. 4:48 Uh, we, we did the initial testing at the Steel Company of Canada. They were pretty cooperative in giving us opportunities to put, put bearings into their various machines. 4:57 And, uh, so that was kind of like an ex- a, a little bit of a, of a test lab for us. But, uh, I, I could see that there were opportunities in the marine marketplace. Uh, and, uh, 5:09 I, I started fairly on- fairly early on, uh, traveling. My first, uh, international trip was to Sweden. 5:15 And, uh, I went over there, and the Swedish distributor that I started to work with, uh, decided he'd have the, uh, product tested by this, by the T- Swedish Technical Institute in Stockholm, Sweden. 5:27 They tested it and came back with a report about several months later saying it was completely useless, and, uh, it wouldn't be any good as a bearing. So I didn't get totally discouraged by that. 5:39 I figured that their test [laughs] protocol was not exactly realistic. And, uh, so we, we, uh, went, went... We didn't, we didn't pay too much attention to that. We just went ahead and sold it anyway. 5:52 And, uh, so my, my, my efforts were to basically introduce the product and sell it to, uh, stocking distributors who would buy, uh, basic shapes and then- And they need to machine those into bearings or they would supply them to the customers and they'd machine them into bearings, and then we would give them the information they needed to make the, uh, do the design. 6:12 So that's how it all started, and, uh, you know, after a while, I was traveling probably more than I was in Canada. 6:18 I'd pack a bag for, for five weeks and go off and, uh, and I wouldn't be back for another, for, for five weeks because that was the most efficient, uh, uh, c- uh, cost, uh, most cost-efficient, uh, way to, to, to do it. 6:31 And besides, at the end of the five weeks, I was ready to, I was ready to come home, and I was tired. Yeah, I could believe that. That's, that's a lot of air miles to build up, for sure. 6:41 Sandy, this year you're gonna be speaking at, uh, Vanguard's ShipTech Forum, which is taking place on February 25th at the Westin in Ottawa. 6:51 Um, for those who are not familiar with ShipTech, it's, it's a one-day conference which brings together members of industry, government, and military to share knowledge and lessons learned from a technological perspective, and as well to showcase successful investments in cutting-edge technologies, um, for the shipbuilding and marine industries. 7:12 Can you give us a little sneak peek into what your presentation's gonna be about at this year's ShipTech 2020? I certainly could. 7:21 I, I'm, I'm, uh, I'm actually delighted to have the opportunity to tell the story 'cause I think it's a, it's an important story for any Canadian manufacturer to, uh, understand that, uh, there are all kinds of opportunities for a Canadian, uh, company, a manufacturing company like ours to sell in the, in the, in the, in the world market. 7:40 But you, you, if it's going to be in the Navy and Coast Guard world, you really need to have, uh, you need to have, uh, acceptance by your own navy. 7:50 And I found when I was talking to navies internationally and they'd ask me, "Well, what's your, what is the Canadian Navy using?" Uh, I, I had to be honest and say, "Well, not very much." 8:00 [laughs] We've got it on, we had our bearings on the two supply ships, the Protector and the Provider, and that was all we had at that point. 8:10 And I can remember saying, them saying, "Well, when you get a little more time on that, let, let us know and we may try it." Um, 8:17 and really, we, we built our reputation on having, uh, gone from those two vessels into the, the Canadian Patrol Frigate Program, which was the, uh, the, the pr- which was the naval program that really launched us into the international naval, uh, and, and Coast Guard world. 8:34 And, and today we're supplying our bearings to 45 navies of the world, navies and coast guards. That's, uh, that's truly impressive. 8:42 So if I, if I understand you right, you probably had to go outside of Canada to get your product sold and recognized, and then slowly come back and, and win the business here. Is that, is that correct? 8:55 Yeah, we, we obviously, whatever we were successful with anywhere in the world, we would always bring back home or bring it to any customer, any new customer that we were going to be, uh, hoping to sell to. 9:06 Um, the, the biggest, uh, biggest Canadian naval project at the time was the Canadian Frigate Program, and they said, the folks at, uh, DND and at Irving Shipyard said, "Look, you, you just don't have enough time on these two. 9:19 So you only got two, uh, two years of service on the Protector and the Provider. 9:23 We, we, we can't, we can't, even though you're a Canadian manufacturer and we think you probably have a great product, we, we c- it's not enough to have just two years service." 9:32 So we were a little bit dis- di- disappointed in that. But we've, we, we were ready, uh, to, in case anything changed, to, uh, spring into action. 9:43 And as a matter of fact, what happened is they built the first ship with British bearings, and they went out on sea trials, 9:52 and I can remember being at a meeting in Ottawa, and Commodore Riley tapped me on the shoulder at a party and he said, "Sandy, I think it's time." And that- [laughs]... 10:03 that little phrase launched us into the international marine market because that was the decision that the Canadian Navy was going to take our bearings for the, for the rest of the Frigate Program, or the, the whole program. 10:17 And, uh, it was a truly a, a moment in our company that I'll, I'll never forget. You know what? That is a great story. 10:24 It's a great Canadian story to hear, and obviously your product is of high quality, and I guess the rest is just history. Sandy, for your presentation, are there any key takeaways that attendees can expect to receive? 10:39 Yeah. I would say that our example is one that others can follow, uh, how a small Canadian manufacturer can win a big export market with a little help from our own navy and coast guard. That, uh, 10:53 and you mentioned the Rudakov, which was a deep sea, uh, tug that I bought from the Russian Navy and out- outfitted it with all the products that we were making, plus others that we hadn't sold, uh, but were testing. 11:06 So there's no test facility in the world that can beat a real shipboard test, and, and so we had our own ship to do the testing on. 11:13 Well, not with, not just that one, but we also bought a, a bulk carrier, uh, a 3,500-ton bulk carrier, and, uh, it had a crew of 18, and we, we actually traded with that vessel. 11:23 We, we also used it as a floating showcase for, for our products and, no, not so much a showcase, but a test lab for our products. And, uh, 11:34 and then I think, uh, that, that if there are any partnerships that are possible, uh, talking about one right now that hasn't been announced, but it will be at ShipTech, where we m- may be able to partner, uh, we're hoping to partner with a couple of other Canadian companies and, uh, supply a bigger, uh, scope of supply than we ever have in the past. 11:58 Well, we're definitely looking forward to that announcement, and, uh, what a great idea to have basically a floating display like that. Is there anybody else who does that? 12:09 Well, I heard that there was a Norwegian company that was in the, um, in the electronics business that had a, a, a fishing boat that was equipped that way. But I never learned, 12:19 I, I never heard o- where it was w- where it was trading or what were, or who was s- financing it. No, I don't know of anyone else that did it. 12:27 And we, what we would do is we would sail from one port to the next, and our distributor in the port that we were going to would arrange a berthing space for us, and they would also invite customers to come on board and, uh, and see what we had. 12:41 And, uh, so the, we, we'd get into port, let maybe say, uh, one day, and then the next day we were ready to, uh, re- receive visitors. And they'd come on board, and they'd... 12:50 And then this was a steam tug, so everything on the tugboat was run by steam engines. It was a, a real work of art. It was beautiful. Everything was polished brass and, and, uh, and, and in first class condition. 13:01 Uh, we, we would invite them in. We'd show them the engine and the boiler, and then we'd show them all the parts that we had on the Bering, on the, on the, the ship. And they'd be, uh, they'd be very impressed. 13:11 And then we had Canadian beer and wine and, uh, we, we had an after deck that was a little bit of a bar. And after, after all the visits were over, we had a, we'd usually wind up having a party. 13:22 Uh, and so it was a very successful, uh, vehicle, and we got a lot of, uh, a lot of compliments on it. It was so unique. 13:30 You know, as a captain, I mean, I had to, I had to be, uh, I had a lot of work to do because [laughs] we'd get into port, and then we'd have to clean up and, and get it ready for the, for the, for the visitors to come on board and, and sometimes with, with almost no sleep. 13:44 'Cause I'd lie on my bunk at night, and if I wasn't on watch, I'd be watching the, uh, I'd be watching the, the, the gyro compass repeater on the, on the deck, uh, uh, above me and saying, "What the heck are we doing turning 30 degrees to starboard?" 13:58 [laughs] I, I'd, I'd jump up out of bed, no- nothing but my underwear on, and run up to the bridge and say, "What are we doing?" [laughs] So, you know, it, uh... 14:07 And then I'd get into port in the, in the morning, and then we had to, we had to be ready to show customers around the ship later that day. So, but it was, uh, we did almost 300 ports. Uh, you mentioned 200. 14:17 It was almost 300 ports a- until we finally s- uh, put the vessel up for sale in 2007. Well, it sounds like it was a great experience and, and a great way to do business. 14:28 You're listening to Vanguard Radio, and we've had the privilege to speak with a visionary and an innovator and the founder, uh, George A. Thompson, otherwise known as Sandy, uh, from Thordon Bering Inc. 14:42 Sandy, I, I really wanna thank you for coming on the show. 14:45 It's been quite interesting, and I hope, uh, that you have good success with your partnership announcement, and I hope that you'll come back on to tell us a little bit more about that as well. 14:54 Well, it's a pleasure meeting you on the radio, Jay. [laughs] And I look forward to meeting you in person, I hope. Yeah, for sure. [upbeat rock music]